Lazer Sport 50 Build – SOLD

8
Lazer sport 50

Here is the most current project I’ve been working on. It started out as a roller that needed a full restoration. It is mostly a Lazer Sport 50 but also has some parts from a Motomorina Sebring.

The moped has almost new parts. The engine bottom end is a Minarelli V1 NOS (New Old Stock). It had never been run or mounted to a moped. Though from sitting over time the crank bearings were seized so it was rebuilt. 

The original forks, wheels, and swingarm were used on another build. The original tank had a lot of pinholes, so it’s been replaced as well. Sebring forks, wheels, and swingarm are used to replace the originals.

LAZER SPORT 50 APPEARANCE

Bernardi “acorn” wheels | Sava MC11 tires | Sebring forks with boots | Sebring front fender polished | Bullet headlight painted bucket, polish bezel | Black VDO speedo | Stock handlebars | Painted Vespa controls with polished levers | Bown grips | Reproduction gas tank | Cafe racer seat | Black and white adjustable rear socks | OEM rear fender polished | Sebring swingarm | Buzitti kickstand | White BMX pedals | All tabs and mounts for covers removed | Gloss white paint | New “Lazer” tank decal |

ENGINE

Minarelli V1 | NOS clutch | Blue clutch springs | NOS crank | Polini 80cc kit | Stock head | MLM people’s exhaust | MLM 19mm intake | Delorto 19mm PHBG carburetor | Chrome and foam air filter | Trail Tech voltage regulator | Trail Tech temp gauge

Vintage Moped shirts

8 comments

  1. Shawn Hammons 2 July, 2020 at 14:58 Reply

    I need some of those decals. Lol ive got one thats getting sandblasted now. Best bikes for long rides. I put like 1500 miles on my general last year.

    • louhtx 7 July, 2020 at 14:36 Reply

      Hello Fernando,

      This one has been sold. Are you looking for the same model moped or just a moped in general?

  2. Will 31 July, 2020 at 16:55 Reply

    How much do these mopeds sell for in general? I understand that most have been sold, but these are great and I am very interested.

    • louhtx 31 July, 2020 at 23:05 Reply

      Hello Will,

      The price varies and custom builds like this one can be a bit higher depending on what is requested. I do my best to work with your budget to build the best looking moped that will satisfy your needs. Projects start around $500, which will usually cover the cost of acquiring the bike and most of the labor involved in the build. After that, the price goes up based on the parts needed or wanted in the build. Feel free to email me if you have any more questions or would like to discuss a build for you. [email protected] Have a good day.

Post a new comment